Upravit stránku

The first generation of ATIS was some time ago the true benchmark for DHV 1–2 gliders. It was voted as the glider of a year by VOL LIBRE. The reviewers were enthusiastic about the glider and they expressed the pity to give the glider back.

  • Product description

    The first generation of ATIS was some time ago the true benchmark for DHV 1–2 gliders. It was voted as the glider of a year by VOL LIBRE. The reviewers were enthusiastic about the glider and they expressed the pity to give the glider back.

    And ATIS 2 is just new and we hope it could become not only new wing but also very reputable wing as well even though it will be difficult to rival the old generation.

    ATIS 2 is just new in any point of view: new certification EN-B on CEN 926–1 and 926–2, new profile, new layout and new experience.

    (EN B equals right now to the DHV 1–2 classification of the glider, the certification is DIFFERENT, and CEN 926–2 is different from DHV certification!)

    The main distinctive features are:

    • high stability
    • speed and ability to penetrate in the headwind
    • low weight
    • comfortable SKY handling
    • thermalling
    • predictable and easily controlled reactions during SIV manoeuvres (Simulation d’Incident en Vol)
    • minimum sink rate and high glide ration

    The main changes compared to the first generation of the glider:

    • new profile with lighter ribs concept and higher speed range…
    • new layout scheme
    • new design of stabilizers
    • higher speed range with lower sink and higher glide efficiency
    • new, easy to use and highly efficient speed system
    • new geometry
    • new technology of the leading edge design
    • trailing edge with velcro opening for easy cleaning of the canopy

    ATIS 2 is also suitable for MPG and PG flying.

    Each glider is delivered with:

    • free Porter bag
    • free T-shirt SKY TEAM
  • Technical info
    ATIS 2 (2006-2010)SMLXL
    Layout (m2)23.1125.0026.6528.83
    Layout span (m)10.8611.2911.6612.12
    Layout aspect ratio5.105.105.105.10
    Projected surface (m2)20.6922.3823.8625.80
    Projected span (m)9.109.479.7710.16
    Projected aspect ratio4.004.004.004.00
    Number of cells53535353
    Weight of the glider (kg)5.05.25.45.7
    Take-off weight (kg)60–8075-9587–110105–130
    Trimspeed (km/h)37373737
    Min. speed (km/h)23232323
    Max. speed  (km/h)48484848
    Max. gliding ratio8.58.58.58.5
    Min. sink rate (m/s)1.151.151.151.15
    CertificationEN BEN BEN BEN B
  • Materials

    Materials:

    Canopy

    The French company Porcher Sport, which is part of the NVC GROUP, supplies the glider fabric. In the last two years Porcher Marine have been heavily involved in fabric development; creating new and more durable coatings which has led to a new generation of materials that came to be known as New Skytex.

    The new coating is much more resistant to abrasion, humidity and is UV resistance.

    We use Skytex 9017 and coating E77A (bilateral water base coating that impregnates the fibres, rather than just the surface) for the top surface. The under surface of the wing is made from the same fabric with an E38A coating. The internal ribs are made from Skytex 9017 and the E29A coating.

    The fabric is manufactured using the “Rip Stop” weave structure, out of superpolyamid (PA 6.6) by the American firm DU PONT.

    Line scheme

    The lines on the ATIS 2 are of the highest quality and are supplied by the German firm EDELRID. These lines create high resistance from mechanical abrasion as well as a high degree of length stability.

    For the upper cascade we used ELDERID 7850–080 and 7850–130 lines. These lines are 1.0 and 1.3 mm in diameter; the core is manufactured out of “dyneema” and the outer sheath from polyester. The lower lines are manufactured out of 7850–240 with diameter 1.8 mm, 7850–200 and 7850–160 line series with 1.6 and 1.5 mm diameters. The core is made from “aramid” and the outer sheath is again made from polyester.

    Risers

    The risers are made from 20 mm wide webbing, it is manufactured by our supplier MOUKA TIŠNOV. The suspension lines are connected to the risers by means of quick links (mailons); which come from the French supplier Maillon Rapide.

    In 2007 Sky Paragliders company was certified as a 100% SKYTEX partner for Porcher Marine fabrics. That allows us to use the latest development benefits and share them with all our pilots. Also the certification ensures that the whole glider is made of the same material and that SKY PARAGLIDERS do not combine the best available quality of Porcher with any other materials available in the market.

     

  • Download
    ATIS 2 manualpdf

    CZ / EN

    ATIS 2 reviewpdf

    Review Parapente Mag

    ATIS 2 reviewpdf

    Review Vol Libre

    ATIS 2 certificationpdf

    Certificate